COUPLING DAMPER FOR BRADLEY HU12 3500KG COUPLINGS
- Model: 457-158501
- SKU: MP2059
€54.99
Ex Tax: €44.71
-
Shop for parts
Top Brands
COUPLING DAMPER FOR BRADLEY HU12 3500KG COUPLINGS
Coupling bellows for Bradley HU12 with 50mm ball. Supplied with locking nuts and cable tie...
€31.00
Ex Tax:€25.20
Knott detachable brake cable. For use with Knott axles, brake drums and brake shoes.These cables measure 1230mm on the PVC outer sleeve and 1440mm fro..
€14.49
Ex Tax:€11.78
Knott detachable brake cableMeasures 1630/1840mm (outer PVC sleevelength/overall cable length)Cup on the wheel side of the cable comes with a 22mm fla..
€17.50
Ex Tax:€14.23
Brake shoe adjuster for Knott brakesTo suit 250 x 40 brake drum.Comes with wedge and bolt...
€13.80
Ex Tax:€11.22
Brake shoe expander for Knott brakes. Used in 200, 203 & 250mm. dia. drums and is pulled by the brake cables when the brakes are activated to expa..
€11.00
Ex Tax:€8.94
Bearing Kit for Bradley 200 & 203mm. drums. Kit consists of:
- Outer bearing no. 44649. Outside dia. 45mm. Inner dia. 27mm.
- Inner bearing no. ..
€22.00
Ex Tax:€17.89
Bearing Kit for Bradley 250mm. drums. Kit consists of:
- Outer bearing no. 15123.
- Inner bearing no. 501349.
- bearing shells
- Seal 300 187 37
..
€30.00
Ex Tax:€24.39
Castle nut washer for Indespension 200/203mmDrums 3/4" BSF thread..
€6.00
Ex Tax:€4.88
Bearing kit for Bradley jockey wheels, Kit 166 for Bradley TJ15 & TP15..
€10.01
Ex Tax:€8.14
Bradley 43mm Telescopic Jockey wheel.43mm diameter tube 175mm metal wheel and a rubber tyre.Handle to ground height - Min 700mm and Max..
€60.00
Ex Tax:€48.78
Bradley Doublelock 48mm Cast Iron Jockey Wheel /Rear Stand Clamp
Heavy duty clamps, designed for commercial use.
Suits 48mm jockey wheels ..
€38.99
Ex Tax:€31.70
Bradley Ball & Pin assembly 3500 kg capacity EU approved..
€149.00
Ex Tax:€121.14
Bradley Coupling HeadFits Hu8HE, HU12 and HU14To suit 50mm ball hitchBradley Kit 2030..
€138.50
Ex Tax:€112.60
Suitable for Bradley HU3HE (post 1996)
Quality dampers from German manufacturer Stabilus
Dimensions on drawing (mm);
A1 - 28
A2 - 24
B..
€95.99
Ex Tax:€78.04
AL-KO brake shoe expander for 200x51mm & 230x61mmTo suit 2051 and 2361 Alko brake shoesThe expander is pulled by the brake cables and pushes the s..
€11.50
Ex Tax:€9.35
Brake spring kit for AL-KO 200 x 51mm & 230 x 61 shoes.Kit contains 2 retaining springs2 retaining spring plates1 tension spring..
€11.00
Ex Tax:€8.94
Sealed bearing for AL-KO 230x61 drum (drum ID=230mm x shoe width=61mm.) AL-KO part no. 641551Bearing no. 582226Bearing size: ID=42mm., OD=80mm., ..
€67.50
Ex Tax:€54.88
Alko halfshell for cable entry to Alko backplates.Fits cables with a 23.5mm bell.Sold individually...
€3.51
Ex Tax:€2.85
Circlip for AL-KO 230x61mm. bearing 80 x 2.5mm. AL-KO part no. 703111..
€4.00
Ex Tax:€3.25
Aspock Lens to suit Earpoint 3 light.Slope to right side. Traditionally right hand (offside)Lens only...
€20.00
Ex Tax:€16.26
Aspock (Aspoeck) Earpoint 3 with Fog.Sloped edge to the right hand side. Traditionally a right hand light (offside) although some trailer manufacturer..
€31.99
Ex Tax:€26.01
Aspock (Aspoeck) Earpoint 3 with reverse.Sloped edge to the left hand side. Traditionally a left hand light (nearside) although some trailer manufactu..
€32.00
Ex Tax:€26.02
0.5 m cable with 5pin or 8pin Bayonet connector - suitable for Brian Jame A4 (5pin) or C4 (8pin)Full LED.Fog and ReverseIntegrated reflector.Identica..
€100.00
Ex Tax:€81.30
0.5 m cable with 5pin or 8pin Bayonet connector - suitable for Brian Jame A4 (5pin) or C4 (8pin)Full LED.Fog and ReverseIntegrated reflector.Identica..
€100.00
Ex Tax:€81.30