13 PIN CAR AND TRAILER TESTER
13 Pin car and trailer tester is suitable for testing ISO 11446/13 pin lighting & 12V power supply circuits
LED indicators clearly show any faults
Suitable for testing LED & filament bulb trailer lighting
Requires 1 x 9V PP3 battery (not included)
Notes & instructions for use :
- The yellow button on the side must be depressed and held down to test a function. Releasing the button ends the test.
- LED indicators will show green when function is tested and correctly wired, or red if a fault is present
- 12V power supplies can only be tested on the towbar side
- Towbar testing requires vehicle ignition to be switched on and each function activated in turn
- Only for use with 13 pin plugs and sockets. Can be used in conjunction with a suitable adaptor (eg MP6005 or MP6015) to test 7pin/ISO1724 lighting circuits
- Do not check towbar and trailer functions at the same time
- Model: 457-1025
- Weight: 0.17kg
- Dimensions: 5.00cm x 5.00cm x 20.00cm
€17.99
Ex Tax: €14.63