Menu
Menu
Your Cart

13 PIN CAR AND TRAILER TESTER

13 PIN CAR AND TRAILER TESTER
13 PIN CAR AND TRAILER TESTER

13 Pin car and trailer tester is suitable for testing ISO 11446/13 pin lighting & 12V power supply circuits


LED indicators clearly show any faults 

Suitable for testing LED & filament bulb trailer lighting

Requires 1 x 9V PP3 battery (not included) 


Notes & instructions for use :

  • The yellow button on the side must be depressed and held down to test a function. Releasing the button ends the test.
  • LED indicators will show green when function is tested and correctly wired, or red if a fault is present
  • 12V power supplies can only be tested on the towbar side
  • Towbar testing requires vehicle ignition to be switched on and each function activated in turn
  • Only for use with 13 pin plugs and sockets. Can be used in conjunction with a suitable adaptor (eg MP6005 or MP6015) to test 7pin/ISO1724 lighting circuits
  • Do not check towbar and trailer functions at the same time

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Captcha
  • Model: 457-1025
  • Weight: 0.17kg
  • Dimensions: 5.00cm x 5.00cm x 20.00cm
€17.99
Ex Tax: €14.63