Bradley / Indespension 200/203 castle nut
Bradley / Indespension 200/203 castle nut
- Model: 457-3145
- MPN: HUB200
€6.00
Ex Tax: €4.88
-
Shop for parts
Top Brands
Bradley / Indespension 200/203 castle nut
Castle nut to fit Avonride 200/203 brake drums- Knott Avonride A/C/E/F & R Series..
€4.99
Ex Tax:€4.06
5/8" Castle nut, used on most unbraked susension units and stub axles...
€6.00
Ex Tax:€4.88
Clevis pin & split pin set to suit M8 & 5/16" clevises, 26mm. long pin, 8mm. dia...
€2.00
Ex Tax:€1.63
Castle nut to fit Avonride 200/203 brake drums- Knott Avonride A/C/E/F & R Series..
€4.99
Ex Tax:€4.06
5/8" Castle nut, used on most unbraked susension units and stub axles...
€6.00
Ex Tax:€4.88
3/8 U.N.F. Wheel Studs
These wheel studs have a 3/8 u.n.f. thread.
The thread is 20mm long.
The splin is 10.5mm.
(Pack Of 5 )..
€10.00
Ex Tax:€8.13
Wheel Stud 5/8 UNF X 37mm pack of 5..
€15.99
Ex Tax:€13.00
Bearing Kit for Bradley 200 & 203mm. drums. Kit consists of:
- Outer bearing no. 44649. Outside dia. 45mm. Inner dia. 27mm.
- Inner bearing no. ..
€22.00
Ex Tax:€17.89
Bearing Kit for Bradley 250mm. drums. Kit consists of:
- Outer bearing no. 15123.
- Inner bearing no. 501349.
- bearing shells
- Seal 300 187 37
..
€30.00
Ex Tax:€24.39
Bearing kit for Bradley jockey wheels, Kit 166 for Bradley TJ15 & TP15..
€10.01
Ex Tax:€8.14
Bradley 43mm Telescopic Jockey wheel.43mm diameter tube 175mm metal wheel and a rubber tyre.Handle to ground height - Min 700mm and Max..
€60.00
Ex Tax:€48.78
Bradley Doublelock 48mm Cast Iron Jockey Wheel /Rear Stand Clamp
Heavy duty clamps, designed for commercial use.
Suits 48mm jockey wheels ..
€38.99
Ex Tax:€31.70
Bradley Ball & Pin assembly 3500 kg capacity EU approved..
€149.00
Ex Tax:€121.14
Bradley Coupling HeadFits Hu8HE, HU12 and HU14To suit 50mm ball hitchBradley Kit 2030..
€138.50
Ex Tax:€112.60
Suitable for Bradley HU3HE (post 1996)
Quality dampers from German manufacturer Stabilus
Dimensions on drawing (mm);
A1 - 28
A2 - 24
B..
€95.99
Ex Tax:€78.04
Bradley Doublelock coupling head, KIT266Suitable for Bradley HU3, S80, HU4, 5, 6, 8L & 9 couplings900-2750 kg capacity..
€115.00
Ex Tax:€93.50
5/8" Castle nut, used on most unbraked susension units and stub axles...
€6.00
Ex Tax:€4.88
Castle nut to fit Avonride 200/203 brake drums- Knott Avonride A/C/E/F & R Series..
€4.99
Ex Tax:€4.06
Genuine Knott hub nut to suit Knott Avonride hubs/drumsM24 X 1.5 FLANGE NUTSold as a pairKnott part no. 574014..
€9.00
Ex Tax:€7.32
Knott castle nut, M20x 1.5mm, consists of 2x M20 nuts, 2x washers, 2x split pins..
€20.00
Ex Tax:€16.26
Knott castle nut M24x 1.5mm, Consists of 1x M24 nuts, 1x washers & 1x split pins..
€16.50
Ex Tax:€13.41
Axle Nut Castelled 5/8 UNF..
€11.50
Ex Tax:€9.35
M27x2mm neutral One-Shot / hub / stake nutSuitable for ALKO 2361 EURO brake drumsSocket required 36mmNote: It is strongly recommended that hub/stake/o..
€6.00
Ex Tax:€4.88
M24x1.5mm neutral One-Shot / hub / stake nutSuitable for ALKO, Knott, Avonride and BPW brake drumsSocket required 32mmNote: It is strongly recommended..
€4.50
Ex Tax:€3.66
Castle nut to fit Peak 203x40 drum, 3/4" UNF thread..
€5.50
Ex Tax:€4.47
The Avonride R series hub nut, washer, and split-pin are designed for use on trailers and caravans equipped with an Avonride axle with an R series hub..
€26.49
Ex Tax:€21.54